This simulation was labeled as private.

This simulation was labeled as private.

This simulation was labeled as private.

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

This simulation was labeled as private.

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

This simulation was labeled as private.

This simulation was labeled as private.

This simulation was labeled as private.

Graphite Anode (Ecker et al.) + typical Nickel Cobalt Aluminium (NCA) Cathode Particle Size Cathode 0.5μm　 Anode　5μm Thickness 75μm　100μm Temperature 253K reaction rate constant both ca. an. 0.59 lower conductivity and diffusivity

This simulation was labeled as private.

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).

Mazumder model validation: discharge at 1C over 3800s, timestep of 1s from 100% SOC. Fixed U_n AND U_p. Updated k0 (divided by the Faraday constant), surface area A, initial concentration in the electrolyte, input current. Note I use 1/2 of electrode area (since the actual number, 10452 cm^2, does not fit into the input field). I reduce the input current correspondingly (-3A instead of -6A). This will not affect the input current density which is I/A.

Mazumder model validation: discharge at 1C over 3800s, timestep of 1s from 100% SOC. Fixed U_n AND U_p. Updated k0 (divided by the Faraday constant), surface area A, initial concentration in the electrolyte, input current. Note I use 1/2 of electrode area (since the actual number, 10452 cm^2, does not fit into the input field). I reduce the input current correspondingly (-3A instead of -6A). This will not affect the input current density which is I/A.

Mazumder model validation: discharge at 1C over 3800s, timestep of 1s from 100% SOC. Fixed U_n AND U_p.

Mazumder model validation: discharge at 1C over 3800s, timestep of 1s from 100% SOC. Fixed U_n

This simulation was labeled as private.

Mazumder model validation: discharge at 50C over 3800s, timestep of 1s from 100% SOC

This simulation was labeled as private.

Ecker, M. et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: I. Determination of Parameters. J. Electrochem. Soc. 162, A1836–A1848 (2015). Ecker, M., Käbitz, S., Laresgoiti, I. & Sauer, D. U. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery: II. Model Validation. J. Electrochem. Soc. 162, A1849–A1857 (2015).